Measurement Microphone M2010

	M2010 Characteristics: 1/2” omni-directional pressure microphone Measurement Range typ. 24 - 145 dBSPL Flatness Class 1 (IEC 61672-1) Phantom Power 10 - 48 VDC Balanced Output
	Detachable Cable The detachable microphone cable at the pre-amplifier simplifies adaptations into mechanical fixtures (such as robotic arms).
	Packaging The protection-case includes M2010 microphone with      - detachable 1.5 m cable      - individual serial number Wind­ protector Microphone stand Calibration certificate with       - frequency response       - sensitivity value

Technical Data
Measurement Microphone M2010

Microphone Type		1/2” pre-polarized condenser, free field, omni-directional
Sensitivity		-29 dBV/Pa ±3 dB (35 mV/Pa @1kHz)
Flatness		better Class 1 (IEC61672-1) < ±1 dB @ 100 Hz - 4 kHz < ±2 dB @ 10 Hz - 20 kHz
Maximum SPL		145 dBSPL typical @ THD 3%, 1 kHz, 48 VDC phantom power
Equivalent Noise Level		24 dBSPL (A-weighted)
Temperature Coefficient		0.01 dB / °C @ (-10°C to +50°C)
Long Term Stability		>250 years /dB
Electrostatic Capacitance		18 pF (cartridge only)
Output Impedance		100 Ohm (balanced) 50 Ohm (single ended)
Power Supply		Phantom power 10 - 48VDC
Worst Case max. SPL @ THD 3%, 1 kHz		>142 dBSPL @ 48 VDC >134 dBSPL @ 24 VDC >128 dBSPL @ 15 VDC >124 dBSPL @ 10 VDC
Power Consumption		4 mA typical
Overall Shell Length		50 mm (1.9”)
Shell Diameter		13.2 mm (0.52”) with protective cap
Connectors		3-pole XLR (NEUTRIK)
Operating Conditions		Cable 1.5 m (5 ft), diameter 3.6 mm cable is detachable at the amplifier side, 3-pole NanoCon® (NEUTRIK)