Flexus FX100 Audio Analyzer

Distortion Analyzer

Solutions for detailed and basic harmonic distortion measurements:

Flexus FX100 Audio Analyzer

XL2 with M4260 Measurement Microphone Minilyzer ML1
Flexus FX100
for detailed analysis

XL2 Audio Analyzer
for basic single value measurements
Minilyzer ML1
for basic measurements

Flexus FX100

The Flexus FX100 supports the simultaneous measurement of Total Harmonic Distortion with or without Noise, as well as the upper harmonics k2 - k35. Furthermore, a user-defined selection of harmonics may be summed together, and individual Pass/Fail limits may be applied. The distortion measurements are available in the Meter, GlideSweep or StepSweep mode.

Example of GlideSweep THD:

 

Order Information


Flexus FX100 Audio Analyzer

FX100 Audio Analyzer

for analog audio (2 Channel)
consisting of
  • FX100 Analog Audio Analyzer
  • FX-Control Suite Software

Contact NTI Americas .

XL2 Audio Analyzer

With the balanced XLR and unbalanced RCA inputs, the XL2 is a comprehensive audio analyzer. It simultaneously measures level, distortion (THD+N) and frequency. The internal loudspeaker or headphone is used for audible monitoring of the test signal or the residual distortion. The optimized low-distortion and low-noise design allow level measurements down to -112 dBu and residual distortions typically lower than -100 dB, which is unmatched in handheld instruments.

XL2 Audio Analyzer

 

Buy at the web shop or contact NTI Americas .

Minilyzer ML1

Minilyzer ML1 screen THDN

THD+N

The Minilyzer ML1 supports Total Harmonic Distortion plus Noise (THD+N) and 2nd to 5th harmonic distortion measurements, expressed in dB or %. Both the input level and frequency measurements run in parallel, while the balance indicator detects defective cables.



Order Information

Minilyzer ML1

Minilyzer ML1

Audio Analyzer
>

Minilyzer ML1 with MiniLINK pre-installed

Audio Analyzer with PC Software

Buy at the web shop or contact NTI Americas .
Distortion
Analyzer