accessories

Compact system case.

Pouch for your instrument.

Mains Power Adapter with removable plug types.

Protection against high voltages

Adapter for generating high quality microphone level signals.

The Cable Test Plug is used for single-ended cable testing.

The backpack provides the professional transport protection for work in the field. It offers space for the handheld instruments and accessories.

The Screen Protection protects the XL3 Screen during use and operation.

The GPS Mouse for the XL3 enhances the reports of the device with ac­curate location and timing data. It features impressive sensitivity and compatibility with multiple satellite systems. Upon successful position fix, the top LED initiates a flashing indicator. Easy mounting is facilitated by a bottom magnet, with optimal performance achieved when the LED side…

This USB-C to LAN Adapter allows you to easily access your network with full high-speed internet.

The XL2 Sound Level Meter in combination with this Limit Light offers a turnkey solution for live sound monitoring. The Limit Light provides a pre-warning with an orange light and indicates that levels have been exceeded with a red light. The sound level limits are set in the XL2.

The XL2 Audio and Acoustic Analyzer in combination with this Stack Light provides a turnkey solution for noise level monitoring or pass / fail measurements where a prominent visual indication is required.

The NetBox connects the XL2 Sound Level Meter to the internet for unattended noise monitoring. It transfers the measurement data to the fully-managed NoiseScout Web Portal (Managed Mode) in real time or provides a secure internet FTP access to the instrument (Gateway Mode). The noise monitor may be connected via 4G, 5G, LAN or Wi-Fi…

Retractable, lightweight tripod with 1/4″ ball head and 3/8″ mounting thread. The flexible ball head mounts the XL2 Analyzer at any angle. The tripod is suitable for all measurement microphones, the outdoor microphone and the TalkBox.

The 4G/LTE Gateway is a small, lightweight, and energy-efficient industrial gateway equipped with mission-critical LTE capabilities, Gigabit Ethernet interface, digital Inputs/Outputs, and micro-USB port.

This mechanical adapter piece mounts the XL2 on a microphone stand. Adapters for 3/8″ or 5/8″ stands are included.

This flexible universal joint mounts the XL2 on a 1/4″ or 3/8″ stand. It provides the facility to mount the XL2 at any angle.

The Input Keypad offers four marker keys to trigger an event recording or categorize any noise during measurements. A typical application is the subjective categorizing of any annoying industrial noise by persons living in the neighborhood.

Microphone cable for passing closed windows or doors. It supports the transfer of the electronic data sheet from the microphone to the XL2 Analyzer.

The ASD Cable allows for extended connections of the NTi Audio measurement microphones. It supports the transfer of the electronic data sheet from the microphone to the XL2 Analyzer.

The XL2 Analyzer together with the Digital I/O Adapter controls external peripherals, such as a big red-orange-green lamp displaying exceeding sound levels. The Digital I/O Adapter connects to the digital I/O interface of the XL2 Analyzer.

Rain, strong wind and the wind direction can influence the outdoor sound pressure level to be measured. Connect a weather station to your noise measurement station to simultaneously record the noise level and the weather data. Depending on the weather station model used, air pressure, temperature, air humidity, rain, wind speed and wind direction are…

The Battery Charger efficiently recharges the spare battery whilst you are using your XL2 Audio and Acoustic Analyzer. One spare Li-Po battery is included with the battery charger.

The Basic Outdoor Case is a simple and efficient solution for outdoor noise monitoring. Powered either by an external mains supply or a small, high capacity battery pack the case is more than adequate for a number of days of monitoring. The robust and lightweight design protects the Sound Level Meter and accessories from a wide…

Mains Power Adapter with removable plug types. It suits the typical power sockets in Australia, China, Europe, Japan, US and UK; 100-240 VAC. (Non-original power supplies may cause interferences with the measurement.)

The heavy duty outdoor case is a professional solution for short- and medium term unattended noise monitoring. The case provides comprehensive protection against dust, water and impacts. Internal dimensions provide ample space for battery packs to power the Sound Level Meter.

The Ever-ready Pouch protects the XL2 during transport and operation. With its convenient belt-clip, the XL2 can be kept close by for those tasks requiring both hands. The Ever-ready Pouch allows operation of the XL2 fitted in the pouch.

The Tracer Battery Adapter Cable connects the Tracer battery pack to a NetBox or an XL2 Analyzer. It ensures that the connected instruments start up properly if the battery has been completely discharged.

The specially adapted GNSS receiver comes with a built-in active antenna in a white housing. It connects to the XL2 Sound Level Meter and the NetBox. Typical applications are to synchronize the start time of one or multiple XL2s precisely with the GPS signal (+/- 0.7 ms) or presenting the precise instrument position in NoiseScout…

The battery-operated Class 2 Sound Calibrator is classified for the calibration of class 2 measurement microphones, sound level meters and other acoustic measurement equipment. This microphone calibrator delivers 114 dB at a frequency of 1 kHz.

The weatherproof enclosure is the tailored fixed installation solution for unattended noise monitoring. The enclosure is IP66 (without ventilation) or IP55 (with built-in fan) rated, highly secure and constructed of strong, hard-wearing reinforced fiberglass.

The MA220 and MA230 offer a low noise microphone preamplifier compatible with standardized 1/2″ microphone capsules. Both include an electronic datasheet for fast setup and ensuring accurate measurements. The MA230 is additionaly enabled for periodic self-tests (Charge Injection Check CIC) dedicated for permanent noise monitoring stations.

The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 or 114 dB at a frequency of 1 kHz.

XLR male/female Adapter with electronic data sheet for automated sensor detection (ASD) of other sensors. The adapter is available in two variations: The type ASD-2 is used for measurement microphones with isolated housing ground connection and the type ASD for induction loop and other sensors.

The Dehumidifier protects the microphone capsule from possible water damage caused by condensation due to high humidity. This provides reliable and precise measurements in changing environmental conditions. The Dehumidifier is an accessory for the outdoor measurement microphone M2230-WP (= M2230 with WP30) and M2340-WP (= M2340 with WP30).

The ICP Adapter connects to the XL2 and generates ICP power supply for accelerometers and other custom sensors. The adapter offers an electronic data sheet, which stores the sensitivity and individual serial number of the connected sensor.

The XL2 requires an SD card that can continuously and simultaneously store many data streams. Unfortunately, many cards available on the market are known to interrupt the read/write process for periods of more than 10 seconds.

A range of uniaxial piezoelectric accelerometers is offered for analyzing the vibrations of devices under test. These may range from slight excursions up to strong impacts. The accelerometers can be mounted either with a screw or a magnet depending on the type selected.

The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.

The FX100 Audio Analyzer controls the external Stack Light via the built-in auxiliary I/O interface and the Flexus I/O Adapter Box. The stack light has three lamp sections, colored green, orange and red.

The Flexus Foot Switch triggers the test execution via the Flexus I/O Adapter box.

The Flexus Digital I/O Adapter Box allows to connect the FX100 Audio Analyzer to peripheral devices such as a PLC, foot switch or stack light.

Measures temperature, humidity and barometric pressure of the test environment. The test data are automatically integrated into turnkey test solutions for close monitoring of the manufacturing process stability.

Mount one single instrument or two FX100 Audio Analyzers besides each other into a rack.

The 100V Impedance Box is tailored for the impedance response and resonance frequency testing of 70/100V speakers.

The Turntable TT01 allows you to execute directivity measurements (polar plots) of microphones, as well as lightweight loudspeakers or other devices. The USB controlled TT01 is supported by NTi Audio software packages, and can also be programmed to your individual needs, e.g. using a .NET API or MATLAB library.

IS-1002 is an advanced, multi-functional audio input switcher with 10 input channels and 2 output channels, featuring individual power supplies for microphones on each input channel. Up to 8 input switchers can be cascaded for multi-channel applications totaling 80 input channels.

A range of uniaxial piezoelectric accelerometers is offered for analyzing the vibrations of devices under test. These may range from slight excursions up to strong impacts. The accelerometers can be mounted either with a screw or a magnet depending on the type selected.

The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 or 114 dB at a frequency of 1 kHz.

The M2010 and M2015 are compact, high-performance measurement microphones with a class1 frequency response, dedicated to research, design lab, end-of-line testing and service. They are particularly suited for applications with restricted available space.