Meter
In the Meter mode, the FX100 acquires the active measurements and shows the single-value result(s) numerically or in a bargraph. The test signal parameters (generator settings) may be amended during the measurement. Ranging can be adjusted automatically or manually. The Meter mode is typically used for single-value measurements or monitoring applications.
![FX-Control: SPL Level Passed](/portals/0/pic/en/FX-screen-SPL-Level-Passed.png)
![FX-Control: SPL Level Failed](/portals/0/pic/en/FX-screen-SPL-Level-Failed.png)
![FX-Control: Frequency Meter](/portals/0/pic/en/FX-screen-Frequency-Meter.png)
Glide Sweep
The key advantage of GlideSweep analysis is the short test cycle time, which makes this method very attractive for high-volume production applications (e.g. frequency response measurement is down to 200ms from 20 Hz - 20 kHz). FX100 GlideSweep analysis supports the audio measurements of the following Y-axis versus X-axis parameters:
- Y-Axis: Level, Gain, Distortion, PureSound Rub&Buzz, Phase, Crosstalk
- X-Axis: Frequency
![FX-Control: Glide-Sweep](/portals/0/pic/en/FX-screen-Glide-Sweep.png)
The GlideSweep measurements are based on an impulse response analysis. Therefore, by applying a time window on the incoming signal, it is possible to mask out the unwanted acoustical reflections of a reverberant room.
![FX-Control: Glide-Sweep](/portals/0/pic/en/FX-screen-Impulse-Response-Time-Window.png)
External Glide Sweep
The FLEXUS FX100 Audio Analyzer is capable of easy and fast measurements of smart devices that do not have an audio input, such as mobile phones, tablet computers, MP3 players, medical and household appliances. How to perform the measurement? Use the FX-Control PC software to create a proprietary glide-sweep test signal based on your chosen sweep parameters. Save this test signal to your Device Under Test (DUT) in mp3 or wav file format. Play the signal from your DUT. The FX100 will synchronize and start analyzing the GlideSweep signal. In a closed-loop setup, i.e. where an audio input channel is available, the test signal is generated by the FX100 generator while, at the same time, the FX100 analyzes the results. This can be used to characterize audio parameters of communication channels with significant signal latency, such as VoIP systems. The channel latency is available as a measurement parameter.
StepSweep
The key advantage of StepSweep measurements is a high signal-to-noise ratio, thus providing highly accurate test results. FX100 offers Frequency-, Amplitude-, Time- and Table-Sweeps, which may trigger with internal or external signals.
FX100 StepSweep analysis supports audio measurements of the following Y-axis versus X-axis parameters:
- Y-Axis: Level, Gain, Distortion, Phase, Crosstalk
- X-Axis: Frequency-, Amplitude-, Time-, Table-Sweeps (discrete sets of frequency / level pairs)
![FX-Control: Amplitude Step Sweep](/portals/0/pic/en/FX-screen-Linearity.png)