Accessories for the Vibration Meter

Accelerometer KS901MF

Vibration Sensor

The lightweight uniaxial piezoelectric accelerometer has been designed for analyzing the vibration of devices with small to medium excursions. With a weight of 24 g it is mounted on the device under test (DUT) via the built-in magnet.

Linear frequency range 0.2 Hz to 10 kHz (±3 dB)

NTi Audio # 600 010 347

Product Data

 

Accelerometer A4580

Vibration Sensor
The uniaxial piezoelectric accelerometer has been designed for analyzing the vibration of large mass devices with small excursions up to strong impacts. With its low weight of 45 g the A4580 can be used for many applications. It can be mounted on the device under test (DUT) with an M5 screw or by using the included magnet.

NTi Audio # 600 010 349

Product Data

ICP Adapter ASD (required)

48V-ICP-Adapter
The ICP Adapter connects to the Vibration Meter and generates an ICP power supply for accelerometers and other custom sensors. The adapter offers an electronic data sheet capability, which stores the sensitivity and individual serial number of the connected sensor.

NTi Audio #: 600 010 223

Product Data

Mains Power Adapter

Mains Power Adapter
Mains Power Adapter with removable plug types. It suits the typical power sockets in Australia, China, Europe, Japan, US and UK; 100-240 VAC.
(Non-original power supplies may cause interferences with the measurement.)

NTi Audio #: 600 000 333

ASD Cable

ASD Cable
The ASD Cable allows for extended connections of the NTi Audio measurement microphones. It supports the transfer of the electronic data sheet from the microphone to the Vibration Meter.

NTi Audio #:
  • 5 meter (16 feet): 600 000 336
  • 10 meter (32 feet): 600 000 364
  • 20 meter (64 feet): 600 000 365

The ASD technology offers the electronic data sheet transfer for cable length until 20 meter (64 feet).

Stack Light

SPL Stack Light
The Vibration Meter in combination with this Stack Light provides a turnkey solution for noise level monitoring or pass / fail measurements where a prominent visual indication is required.

The Stack Light connects directly to the Vibration Meter and shows the actual measurement result with three different colors; green, orange and red.

NTi Audio #: 600 000 610

Product Data

Digital I/O Adapter PCB

Digital I/O Adapter PCB
The Vibration Meter together with the Digital I/O Adapter controls external peripherals, such as a large red-orange-green lamp displaying exceeded sound levels. The Digital I/O Adapter connects to the digital I/O interface of the Vibration Meter.

NTi Audio #: 600 000 380

Product Data

Battery Charger

Battery Charger
The Battery Charger efficiently recharges a spare battery whilst using the Vibration Meter elsewhere. One spare Li-Po battery is included with the battery charger.

NTi Audio #: 600 000 332

Exel System Case

Exel System Case
This compact system case provides a professional option for equipment transport and protection during field work. It offers space for the handheld instruments, cables and accessories.

NTi Audio #: 600 000 334

SD Card 32GB

SD Card
Every 32 GB SD Card is individually tested

The Vibration Meter requires an SD card that can continuously and simultaneously store many data streams. Unfortunately, many cards available on the market are known to interrupt the read/write process for periods of more than 10 seconds. This leads to data loss in the Vibration Meter. These interruptions can occur regardless of the speed rating of the card. Even cards of the same type and from the same vendor behave differently depending on the production date. Therefore, to ensure the integrity of the Vibration Meter data recording, NTi Audio verifies every single card over a period of several days before the card is sent to our customer.

NTi Audio # 600 000 386

Get more Information